Software Start-Up - Audison bit one Advanced Manual

SOFTWARE START UP
Processor inizialization
The software transfers to the processor main memory the
settings selected during the guided procedure.
Once this operation is completed, a message confirming
the update has been done is displayed.
Press OK
BIT ONE SOFTWARE
The processor has been properly set and is ready for use.
STANDARD / EXPERT MODE
The software is preset for two operational modes: Standard and Expert. For both of these modes all the features are
anyway available, however when set in Standard mode some shortcuts and links are available as well, thus easing
its use. To move from a mode to the other click on: CONFIG / WORKING MODE / STANDARD OR EXPERT.
In this Manual you will find detailed information about the features, regardless of the STANDARD mode restrictions.
Any possible relevantly different feature will anyway be addressed in this Manual.
WARNING:
Resist to the temptation of modifying in one second all the parameters available and manageable by the Bit One.
Take your time to get familiar with the possibilities this software offers you.
The adjustments you can perform through the Bit One have an immediate effect on the signal and, if not carried out
with the proper attention, may result in damage to your system's speakers.
Keep in mind you should work keeping the general volume on a level that should not be dangerous to the system.
FEATURES - DSP Settings
Description of the Bit One features the software can manage can be found on the following pages.
12
3
8
2
11
1
24 24
ADVANCED MANUAL / Bit One ADVANCED MANUAL / Bit One
7 10
5
6
4
9