Table of Contents
Advertisement
Hard drive
Description
1 TB, 5400 rpm, 7 mm
500 GB, 7200 rpm, 7 mm, FIPS
500 GB, 7200 rpm, 7 mm, Opal-2
500 GB, 7200 rpm, 7 mm
500 GB, 5400 rpm, 7 mm, hybrid, 8 GB cache
Hard Drive Hardware Kit (includes cover and screws)
NOTE:
Only one mass storage device (hard drive or a solid-state drive) can be installed.
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
To remove a hard drive:
1.
Loosen the 4 captive screws (1) that secure the hard drive to the chassis.
2.
Slide the hard drive (2) away from the connector.
36
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Bottom cover on page
Battery on page
35).
30).
Spare part number
832077-001
820572-001
820573-001
703267-001
732000-001
821665-001
Hide quick links:
Advertisement
Table of Contents
