The Basic Display Menu; Table 9 - Three-Button Option Functions - Honeywell ST 700 User Manual

Physical
Button
Increment
Left

Previous Menu Item
Decrement
Center
 Next Menu Item
Select displayed
menu item for
Right
activation or editing


5.2.1 The Basic Display Menu

The Basic Display Menu is implemented as one long single-level menu and will "wrap around" when
it reaches the start or end of the menu. Operation is as follows:

Press the button to call up the Menu.
1. Select <Exit Menu> and press
2. Use the  and  buttons to scroll through the list of menu items.
3. Press the  button to select an item for data entry or activation. When an item is selected for
data entry or activation, the cursor will jump to the lower line of the LCD to allow editing of
the value. No action is taken against a menu item until the user presses the
4. If you want to abort a data entry operation, simply refrain from pushing any buttons for 10
seconds; the data entry operation will time out and the original value of the selected item will
be preserved.
Revision 8.0
Table 9 – Three-Button Option Functions
Basic Display
Scroll to previous menu item in an active list.
Scroll through alphanumeric list to desired
character (ex. for entering Tag names or
numeric values)
Scroll to next menu item in an active list.
Scroll through alphanumeric list to desired
character (ex. for entering Tag names or
numeric values)
Call up the Main Menu.
Select an item for data entry.
Confirm a data entry operation
Activate the service associated with a
selected menu item.

to exit the Menu.
ST 700 SmartLine Pressure Transmitters User's Manual
Action

button.
Page 27