Introduction To The St 700 Standard Transmitter; Features And Options; Table 2 - Features And Options_St 700 Standard Transmitter - Honeywell ST 700 User Manual

,
2.

Introduction to the ST 700 Standard Transmitter

This section is an introduction to the physical and functional characteristics Honeywell's family of
the ST 700 Standard Transmitters.
2.1

Features and Options

The ST 700 Standard Transmitter is available in a variety of models for measuring Differential
Pressure (DP), Gauge Pressure (GP), and Absolute Pressure (AP).
interface (HMI), materials, approvals, and mounting bracket options.
Table 2 – Features and Options_ST 700 Standard transmitter
Feature/Option
Communication Protocols
Human-Machine Interface (HMI)
Options (Basic Display/Standard
Display)
Calibration
Approvals for details go to page
Mounting Brackets
Integration Tools
Revision 8.0
HART
Basic Digital Display:


Standard Display (HART



Single
130 FM, CSA, ATEX, IECEx, SAEx, INMETRO, NEPSI,
GOST and MARINE
Angle/flat carbon steel/304 and 316 stainless steel,
Marine 304 stainless steel, 316 Stainless Steel
Experion
The three-button option is available for the Basic Display.
The two-button option is available for the Standard Display.
Also, for the Basic Display, the three button reed switch is used only for span &
zero correction and not for the Display navigation.
ST 700 SmartLine Pressure Transmitters User's Manual
Table 2
Standard/Available Options

version 7, Digitally Enhanced (DE), Fieldbus
Three-button programming (optional)
Basic display language: English only

only):
Two-button programming (optional)
Standard display language: English only
Two-mode operations: PV display and Menu
Navigation
lists the protocols, human
Page 3