Installation And Startupfor The St 700 Standard Transmitter; Installation Site Evaluation; Honeywell Mc Toolkit; Display Installation Precautions - Honeywell ST 700 User Manual

4. Installation and Startupfor the ST 700 Standard
4.1

Installation Site Evaluation

Evaluate the site selected for the ST 700 Standard Transmitter installation with respect to the process
system design specifications and Honeywell's published performance characteristics for your
particular model. Some parameters that you may want to include in your site evaluation are:

Environmental Conditions:
o Ambient Temperature
o Relative Humidity

Potential Noise Sources:
o Radio Frequency Interference (RFI)
o Electromagnetic Interference (EMI)

Vibration Sources
o Pumps
o Motorized System Devices (e.g., pumps)
o Valve Cavitation

Process Parameters
o Temperature
o Maximum Pressure Rating
4.2

Honeywell MC Toolkit

In preparation for post-installation processes, refer to the MC Tookit User Manual, Document
# 34-ST-25-20, for battery conditioning and device operation and maintenance information.
4.3

Display Installation Precautions

Temperature extremes can affect display quality. The display can become unreadable at temperature
extremes; however, this is only a temporary condition. The display will again be readable when
temperatures return to within operable limits.
The display update rate may become slower at cold temperature extremes, but as with readability,
normal updating resumes when temperatures are within limits for full operability.
Page 10
Transmitter
The ST 700 Standard Transmitter should not be operated without the
endcap covers on. Covers can be removed temporarily for configuration
with buttons or during maintenance/wiring.
The static voltage must be discharged before removing the cover.
ST 700 SmartLine Pressure Transmitters User's Manual
Revision 8.0