Table of Contents
Advertisement
4.2.7 The Basic Display Menu
The basic display Menu is implemented as one long single-level menu and will "wrap around" when it
reaches the start or end of the menu. Operation is as follows:
Press the
button to call up the Menu.
1. Select <Exit Menu> and press
2. Use the and buttons to scroll through the list of menu items.
3. Press the button to select an item for data entry or activation. When an item is selected for data
entry or activation, the cursor will jump to the lower line of the LCD to allow editing of the value.
No action is taken against a menu item until the user presses the
4. If you want to abort a data entry operation, simply refrain from pushing any buttons for 10
seconds; the data entry operation will time out and the original value of the selected item will be
preserved.
LCD Contrast
PV Display
PV Decimal
Custom Units
(Available only
when Custom
Output PV display
is selected)
Scaling Low
(Available only
when Custom
Output PV display
is selected)
Scaling High
(Available only
when Custom
Output PV display
is selected)
76
to exit the Menu.
Table 17 – The Basic Display Menus
»»»»»
Pressure
Percent Output
Custom Output
Loop Output
None
X.X
X.XX
X.XXX
#########
#########
ST 800 Pressure Transmitter User's Manual
Adjust the LCD contrast level.
Range from » (1) to »»»»»»»»» (9)
Default: »»»»»»» (7)
Pressure Units
Select Process
%
Variable (PV) to
be shown on the
mA
display from list.
Select the PV decimal resolution to
be shown on selected screen from
list.
Enter custom text using any
alphanumeric value up to 8
characters long.
Enter the low and high scaling
limits. These limits are used to
scale the loop output to the
desired value.
button.
Press to enter
menu selection
and to select
level.
to enter
Press to enter
menu selection
and to select
from list
to enter
Custom Units:
and to select
Alphanumeric
to enter and
shift to next
character
Press to enter
menu selection
and to select
number.
to enter and
shift to next digit
Revision 15
Advertisement
Table of Contents
