Mounting_St 700 Basic Transmitter; Summary; Figure 44 - St 700 Basic Transmitter - Typical Bracket Mounted And Flange Mounted Installations - Honeywell ST 700 User Manual

12.4 Mounting_ST 700 Basic Transmitter

12.4.1 Summary

ST 700 Basic Transmitter models, except flush mounts and those with integral flanges, can be
attached to a two-inch (50 millimeters) vertical or horizontal pipe using Honeywell's optional angle
or flat mounting bracket; alternately you can use your own bracket. Flush-mount models are attached
directly to a process pipe or tank by a one-inch weld nipple. Models with integral flanges are
supported by the flange connection.
Figure 44 shows a typical bracket-mounted and flange-mounted transmitter installations.
Figure 44 – ST 700 Basic Transmitter - Typical Bracket Mounted and Flange Mounted Installations
ST 700 SmartLine Pressure Transmitters User's Manual
Page 78 Revision 8.0