Table of Contents
Advertisement
Commands
Download
Use the Download tab to download Configuration, AP Image, and Bootloader files to the AP-600. A TFTP server must
be running and configured to point to the directory containing the file.
Figure 6-3
Download Command Screen
If you don't have a TFTP server installed on your system, install the TFTP server from the ORiNOCO CD. You can
either install the TFTP server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD's Xtras/SolarWinds
sub-directory.
The Download tab shows version information and allows you to enter TFTP information as described below.
•
Server IP Address: Enter the TFTP server IP Address.
–
Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.
Note: This is the IP address that will be used to point the Access Point to the AP Image file.
•
File Name: Enter the name of the file to be downloaded (including the file extension).
–
Copy the updated AP Image file to the TFTP server's root folder. The default AP Image is located at
C:/Program Files/ORiNOCO/AP600/.
•
File Type: Select the proper file type. Choices include:
–
Config for configuration information, such as System Name, Contact Name, and so on.
–
Img for the AP Image (executable program).
–
BspBl for the Bootloader software.
•
File Operation: Select either Download or Download & Reboot. You should reboot the AP-600 after
downloading files.
Upload
Use the Upload tab to upload Configuration files from the AP-600. The TFTP server must be running and configured
to point to the directory to which you want to copy the uploaded file. We suggest you assign the file a meaningful
name, which may include version or location information.
If you don't have a TFTP server installed on your system, install the TFTP server from the ORiNOCO CD. You can
either install the TFTP server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD's Xtras/SolarWinds
sub-directory.
•
Server IP Address: Enter the TFTP server IP Address.
–
Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.
•
File Name: Enter the name of the file to be uploaded.
•
File Type: Select Config.
•
File Operation: Select Upload.
83
Advertisement
Table of Contents
