ORiNOCO AP-600 User Manual page 69

Hide thumbs Also See for AP-600:
Table of Contents

Advertisement

Advanced Configuration
3. If you want to configure a back-up RADIUS server, place a check mark in the box labeled Enable Back-up
RADIUS Authentication Server.
4. Enter the time, in seconds, each client session may be active before being automatically re-authenticated in the
Authorization Lifetime field. This parameter supports a value between 900 and 43200 sec; the default is 900 sec.
5. Select a MAC Address Format Type. This should correspond to the format in which the clients' 12-digit MAC
addresses are listed within the RADIUS server. Available options include:
Dash delimited: dash between each pair of digits: xx-yy-zz-aa-bb-cc
Colon delimited: colon between each pair of digits: xx:yy:zz:aa:bb:cc)
Single dash delimited: dash between the sixth and seventh digits: xxyyzz-aabbcc
No delimiters: No characters or spaces between pairs of hexadecimal digits: xxyyzzaabbcc
6. Select a Server Addressing Format type (IP Address or Name).
If you want to identify RADIUS servers by name, you must configure the AP-600 as a DNS Client. See
Client
for details.
7. Enter the server's IP address or name in the field provided.
8. Enter the port number which the AP-600 and the server will use to communicate. By default, RADIUS servers
communicate on port 1812.
9. Enter the Shared Secret in the Shared Secret and Confirm Shared Secret field. This is a password shared by the
RADIUS server and the AP-600. The same password must also be configured on the RADIUS server.
10. Enter the maximum time, in seconds, that the AP-600 should wait for the RADIUS server to respond to a request in
the Response Time field. Range is 1-10 seconds; default is 3 seconds.
11. Enter the maximum number of times an authentication request may be retransmitted in the Maximum
Retransmissions field. Range is 1-4; default is 3.
12. If you are configuring a back-up server, repeat Steps 6 through 11 for the back-up server.
13. Click OK to save your changes.
14. Reboot the AP-600 device for these changes to take effect.
Figure 4-19 RADIUS Access Control Configuration Screen
DNS
69

Advertisement

Table of Contents
loading

Related Products for ORiNOCO AP-600

Table of Contents