Led Indicators - ORiNOCO AP-600 User Manual

Installation & Basic Configuration

LED Indicators

The AP-600 has four LED indicators. The LEDs are identified in
behavior:
Power Ethernet Link
Solid Green Green when link
exists
Solid Amber Solid Amber
Solid Green Solid Amber
Solid Red Off
Blinking Red Blinking Red or Off
Blinking Red Off
Solid Red Blinking Red or Off
Solid Red Off
Blinking Amber Blinking Amber or Off
Solid Amber Solid Amber
n/a n/a
n/a n/a
Figure 2-16 LED Indicators Illustrated
LED Indicators Illustrated
Ethernet Activity Wireless Activity
Green flash Green flash
with data activity with data activity
Solid Amber Solid Amber
Solid Amber Solid Amber
Off Off
Blinking Red Off
Off Blinking Red
Solid Red Off
Off Solid Red
Blinking Amber or Off Off
Solid Amber Solid Amber
n/a Red
Amber Amber
and exhibit the following
Indication
Normal Operation
Rebooting
Reset to Factory Defaults command issued
SDRAM Test Failure
Hardware Timer Test Failure
Flash Test Failure
Ethernet Test Failure
Wireless Test Failure
Missing or bad AP image
Missing or bad bootloader image (all LEDs
remain solid amber)
Wireless radio is not working properly
Indicated interface in administrative down state
Power LED
Ethernet Link LED
Ethernet Activity LED
Wireless Activity LED
34