Components In The Rear Of The Enclosure - IBM Storwize V7000 Troubleshooting And Maintenance Manual

Components in the rear of the enclosure

This topic describes the hardware components in the rear of the enclosure.
Two canisters are located in the middle of each enclosure. The power supply units
are located on the left and right of the canisters. The left slot is power supply 1
( 1 ), and the right slot is power supply 2 ( 2 ). Power supply 1 is top side up,
and power supply 2 is inverted. The upper slot is canister 1 ( 3 ), and the lower
slot is canister 2 ( 4 ). Canister 1 is top side up, and canister 2 is inverted.
Figure 7 shows the rear view of a model 2076-112 or a model 2076-124 control
enclosure. Figure 8 on page 6 shows the rear view of a model 2076-312 or a model
2076-324 control enclosure with the 10 Gbps Ethernet port ( 5 ). Figure 9 on page 6
shows the rear of an expansion enclosure.
Figure 7. Rear view of a model 2076-112 or a model 2076-124 control enclosure
Table 6. LED descriptions
Name Description
1 The power LED is the upper LED. When the
Power
green LED is lit, it indicates that the main power
is available to the enclosure
2 The fault LED is the middle LED. When the
Fault
amber LED is lit, it indicates that one of the
enclosure components has a hardware fault.
3 The identify LED is the lower LED. When
Identify
the blue LED is lit, it identifies the enclosure.
4 The two-character LCD display shows the
N/A
enclosure ID.
1
Color
Green
Amber
Blue
N/A
3
4
Chapter 1. Storwize V7000 hardware components
Symbol
N/A
2
5