IBM Storwize V7000 Troubleshooting And Maintenance Manual page 144

126
Storwize V7000: Troubleshooting, Recovery, and Maintenance Guide
Table 27. Informational events (continued)
Notification
Event ID type
981022 I
981025 I
981026 I
981101 I
981102 I
981103 I
981104 W
981105 I
981106 I
982003 W
982004 W
982007 W
982009 I
982010 W
983001 I
983002 I
983003 W
984001 W
984002 I
984003 W
984004 I
984501 I
984502 I
984503 I
984504 I
984505 I
984506 I
984507 I
984508 I
Description
Managed disk offline imminent, offline prevention
started
Drive firmware download started
Drive FPGA download started
SAS discovery occurred; no configuration changes
were detected.
SAS discovery occurred; configuration changes are
pending.
SAS discovery occurred; configuration changes are
complete.
The LUN capacity equals or exceeds the maximum
capacity. Only the first 1 PB of disk will be accessed.
The drive format has started.
The drive recovery was started.
Insufficient virtual extents.
The migration suspended because of insufficient
virtual extents or too many media errors on the
source managed disk.
Migration has stopped.
Migration is complete.
Copied disk I/O medium error.
The FlashCopy operation is prepared.
The FlashCopy operation is complete.
The FlashCopy operation has stopped.
First customer data being pinned in a virtual disk
working set.
All customer data in a virtual disk working set is
now unpinned.
The volume working set cache mode is in the process
of changing to synchronous destage because the
volume working set has too much pinned data.
Volume working set cache mode updated to allow
asynchronous destage because enough customer data
has been unpinned for the volume working set.
The firmware level of an enclosure component is
being updated.
The firmware level updated has completed.
The battery conditioning completed.
The battery conditioning started.
The statesave information for the enclosure was
collected.
The debug from an IERR was extracted to disk.
An attempt was made to power on the slots.
All the expanders on the strand were reset.