IBM Storwize V7000 Troubleshooting And Maintenance Manual page 150

Hide thumbs Also See for Storwize V7000:
Table of Contents

Advertisement

132
Storwize V7000: Troubleshooting, Recovery, and Maintenance Guide
Table 28. Error event IDs and error codes (continued)
Event
Notification
ID
type
Condition
010067
W
Too many enclosures were presented to a cluster
(system).
010068
E
The solid-state drive (SSD) format was corrupted.
010069
E
The block size for the solid-state drive (SSD) was
incorrect.
010070
W
Too many controller target ports were presented to the
cluster (system).
010071
W
Too many target ports were presented to the clustered
system from a single controller.
010072
E
The drive is offline as a result of a drive hardware error.
010073
E
The drive is reporting predictive failure analysis (PFA)
errors.
010080
E
The drive is reporting too many errors.
010081
E
The drive format is corrupted.
010082
E
The block size for the drive was incorrect.
010083
E
The drive is offline due to excessive errors.
010084
E
The error counts for the SAS drive exceeded the warning
thresholds.
010085
W
The SAS device was not recognized.
010086
W
The SAS enclosure was not recognized.
010087
W
The SAS device was not able to be identified.
010088
E
There were excessive medium errors on the drive.
010089
E
There were excessive overall timeout errors on the drive. 1680
010090
E
There were excessive times when the drive stopped.
010091
E
A drive failed validation testing.
010092
E
There were excessive medium errors on the solid-state
drive (SSD).
010093
E
There were excessive overall timeout errors on the
solid-state drive (SSD).
010094
E
Login excluded.
010095
E
Drive failed.
010096
E
The drive initialization failed because of an unknown
block size or a block size that is not valid; an unknown
capacity or a capacity that is not valid; or was not able to
set the required mode pages.
010097
E
A drive is reporting excessive errors.
010098
W
There are too many drives presented to a cluster
(system).
020001
E
There are too many medium errors on the managed disk. 1610
020002
E
A managed disk group is offline.
020003
W
There are insufficient virtual extents.
029001
W
The managed disk has bad blocks. On an external
controller, this can only be a copied medium error.
Error
code
1200
1204
1204
1200
1200
1680
1680
1680
1206
1206
1680
1285
1666
1666
1666
1680
1680
1680
1215
1204
1231
1687
1680
1685
1200
1620
2030
1840

Advertisement

Table of Contents
loading

Table of Contents