Intec Force 1 Instruction Manual page 14

THE FORCE/1
Set-U p and Operation, Cont.
the remote cord. In cold weather, your machine is more difficult to start.
If possible, store your FORCE/1 in a warm area overnight before starting.
DISTRIBUTION HOSE:
half inch hose produces the best results. Always use at least 100 feet of
hose on your job. Longer hose
length decreases both capacity and
material throw. At 200 feet of hose,
capacity and throw
reduced by approximately 30%. If
you must use a hose longer than
150 feet, reduce the hose size to
two inch diameter.
HOPPER SAFETY:
Your safety is the most important consideration whenever you are using
any machine. Following the instructions in this manual, along with good
common sense, should allow you to complete your job in a safe, efficient
manner. First, before loading your FORCE/1, follow all safety consider-
ations provided by the manufacturer of the insulation material you are
using, including wearing protective masks or respirators. Never wear
loose clothing or other items while running this machine. Failure to
follow safety precautions may result in permanent injury
Any time you overload the hopper, or anytime you place objects other
than insulation material into the hopper, you are risking personal injury
or equipment breakdown.
For normal attic applications, the two and a
will be
13