Qos Configuration Example - Huawei Quidway S5000 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S5000 Series Ethernet Switches

2.3 QoS Configuration Example

I. Networking requirement
The intranet is connected through Ethernet ports between departments and the wage
query server is connected through the port GigabitEthernet0/1 (subnet address
129.110.1.2). For the wage server, the inbound traffic is limited at 20 Mbps and the
outbound traffic at 20 Mbps on the average. Those packets exceeding the threshold will
be labeled with priority level 4.
II. Networking diagram
Figure 2-2 Networking for QoS configuration
III. Configuration procedure
Note:
Only the commands concerning QoS/ACL configuration are listed here.
1) Define outbound traffic of the wage server.
# Enter name-based advanced ACL view using the traffic-of-payserver.
[Quidway] acl name traffic-of-payserver advanced
# Define the traffic-of-payserver rule in the advanced ACL.
[Quidway-acl-adv-traffic-of-payserver] rule 1 permit ip source 129.110.1.2
0.0.0.0 destination any
Wage server
129.110.1.2
Switch
GE0/1
To router
2-11
Chapter 2 QoS configuration