Operation-Dash Mounted; Setup; Stationary Mode - Kustom Signals Talon Radar Operator's Manual

7.3 OPERATION—DASH MOUNTED

7.3.1 SETUP

1. Turn unit off; unplug power cord. Remove the handle
from the Talon by pressing the handle release button
(latch) on the bottom of the indicator.
2. Slide the indicator onto the mounting pod, pushing
rearward until the release button clicks, indicating the
unit is securely in place.
3. Connect the remote control and speedometer input
cables as required. Plug the unit in, turn on.
4. Set the range and audio levels as needed; select
operating mode.
5. Aim antenna directly at vehicles being monitored.

7.3.2 STATIONARY MODE

1. Complete a tracking history as described in Sec. 7.2.1
Step 4.
2. To lock a speed, press LOCK/REL on the remote
control. To release a locked-in speed, press again. See
Sec. 7.2.2 for details.
3. To shut off the transmitter, press HOLD on the remote.
The HOLD indicator will light, and the TARGET
display will blank (locked speeds will remain). To
return to normal radar operation, press HOLD again.
4. To access the Fastest Vehicle mode, press and hold
FAST/SLOW on the remote control. The FAST
indicator will light, the fastest speed will be displayed in
the LOCK window, and the strongest signal speed will
be displayed in the TARGET window.
Section 7—Operation
7.7