Block Pattern - Epson SC-P20000 SERIES User Manual

SC-P20000 Series/SC-P10000 Series User's Guide

Block Pattern

A
Select Paper Feed Adjust on the control panel.
"Selecting Paper Feed Adjust" on page 148
U
B
Press the d/u buttons to select Block Pattern,
and then press the Z button.
A dialog is displayed.
C
Press the Z button again.
The adjustment pattern is printed.
D
From the printed pattern, select the pattern
with the fewest lines.
This would be pattern 0 in the example shown
in the illustration.
E
Check that the Primary screen is displayed on
the control panel, use the d/u buttons to select
the number you confirmed in step 4, and then
press the Z button.
F
If a message is displayed, press the Z button.
An adjustment pattern that differs to the one in
step 3 is printed.
Maintenance
G
Compare the colors in the center of the printed
patterns, and then select the pattern with the
lightest color.
This would be pattern 0 in the example shown
in the illustration.
H
Check that the Secondary screen is displayed
on the control panel, use the d/u buttons to
select the number you confirmed in step 7, and
then press the Z button.
When settings are complete, the Ready screen is
displayed.
Crosshairs
A
Select Paper Feed Adjust on the control panel.
"Selecting Paper Feed Adjust" on page 148
U
B
Press the d/u buttons to select Crosshairs, and
then press the Z button.
A dialog is displayed.
C
Press the Z button again.
The adjustment pattern is printed.
D
Measure the distance between the "+" symbols.
E
Use the d/u buttons to change the value
displayed on the control panel screen so that it
matches the value you measured, and then
press the Z button.
When settings are complete, the Ready screen is
displayed.
149