SC-P20000 Series/SC-P10000 Series User's Guide
Pressing this button displays the Load/Remove
Paper menu. Instructions for loading or removing
the paper can be displayed by highlighting either
Remove Paper or the type of paper currently
loaded and then pressing the Z button. Follow
the on-screen instructions to load or remove the
paper.
D
Screen
Displays the printer's status, menus, error
messages, and so on. U
page 17
E
Menu button
Displays the menu for the tab currently selected in
the display.
"Using the Control Panel Menu" on page 115
U
F
y button (back button)
Press this button to go up one level in the menu
hierarchy while menus are displayed. U
Operations" on page 115
G
l/r buttons (left and right arrow buttons)
❏
Use these buttons to select tabs. The selected tab is
highlighted and the content of the info display area
is updated for the selected tab.
"Screen View" on page 17
U
❏
Use these buttons while menus are displayed to
position the cursor or delete characters when
entering text for items such as Setting Name or IP
Address.
H
u/d buttons (Up/Down buttons)
❏
Press to select menu items and parameter while a
menu is displayed.
"Menu Operations" on page 115
U
❏
When roll paper is loaded, press to feed and rewind
the paper. Hold down d to feed up to 3 m. Hold
down u to rewind up to 20 cm. Rewinding stops
when the end of the roll reaches the print starting
position. Release the button and then press it again
to resume.
I
Z button
Introduction
"Screen View" on
"Menu
❏
Displays the menu for the tab currently selected in
the display.
"Using the Control Panel Menu" on page 115
U
❏
Use this button while menus are displayed and an
item is highlighted to display the sub-menu.
❏
If this is pressed while a parameter is selected from
the Menu, the parameter is set or executed.
J
button (Help button)
Except when printing is in progress, press this
button to display the Help menu. Highlight an
item and press the Z button to view help for the
highlighted item.
K
" button (Maintenance button)
Displays the Maintenance menu, which is used for
nozzle checks, head cleaning, and so on.
"Maintaining the Print Head and so on" on
U
page 141
L
W button (pause/cancel button)
❏
The printer enters pause status if this is pressed
while printing. To release the pause status, press the
W button again, or select Pause Cancel on the
screen and then press the Z button. To cancel
print jobs being processed, select Job Cancel on the
screen and then press the Z button. When Check
And Clean Nozzle is selected and you press the Z
button, Check And Clean Nozzle is performed for
Head Cleaning.
❏
Press this button while a menu or help is displayed
to close the menu or help and return the printer to
ready status.
M
) button (Feed/Cut Media button)
❏
This button is used with roll paper only. If the printer
is loaded with cut sheets or poster board, pressing
this button will have no effect.
❏
It is used to manually cut roll paper using the built-in
cutter.
"Manual cut method" on page 36
U
16