Cut Sheets Printable Area - Epson SC-P20000 SERIES User Manual

SC-P20000 Series/SC-P10000 Series User's Guide
❏ Paper for which
A
= 20 mm
Premium Glossy Photo Paper (250)/Premium
SemiglossPhoto Paper (250)/Premium Luster
Photo Paper (260)/Premium Semimatte Photo
Paper (260)
❏ Paper for which
A
= 45 mm
UltraSmooth Fine Art paper/Baryta
When you want to change the margins of Epson
Special Media, select the paper you are using from
Select Reference Paper in the Paper menu in Custom
Paper Setting and select Roll Paper Margin.
When Using Custom Paper
Margins for custom paper depend on the option
selected for Roll Paper Margin in the menus, as
shown in the table below.
Roll Paper Margin SettingsU
Setting" on page 125
* Default setting
Roll Paper Margin
Parameter
*
Normal
Top15mm/Bottom15mm
Top35mm/Bottom15mm
Top45mm/Bottom15mm
3mm
15mm
Basic Operations
"Custom Paper
Margin Values
A,C=15 mm
B,D=3 mm
A,C=15 m
B,D=3 mm
A=35 mm
C=15 mm
B,D=3 mm
A=45 mm
C=15 mm
B,D=3 mm
A,B,C,D=3 mm
A,B,C,D=15 mm
c
Important:
❏ Printing is distorted when the trailing edge of
the roll paper comes off the core. Make sure
the trailing edge does not come inside the
printing area.
❏ The print size does not change even when the
margins are changed.
Note:
When printing multiple pages without using auto cut,
the margins between pages are the same as the value
set in Margin Per Page.
"Custom Paper Setting" on page 125
U

Cut Sheets Printable Area

When printing borderless on the left and right, the left
and right margins are 0 mm. (Borderless printing is
not available with poster board.)
The gray area in the illustration below shows the
printable area. The arrow in the illustration indicates
the direction of the ejected paper.
* Varies as below depending on the thickness of the
paper you are using.
Paper thickness 0.08 to 0.8 mm: 279.4 to 1580 mm
Paper thickness 0.8 to 1.5 mm: 279.4 to 1030 mm
62