Replacing Paper - Epson SC-P20000 SERIES User Manual

SC-P20000 Series/SC-P10000 Series User's Guide
E
Check that Ready is displayed on the screen.
When printing continuously
Send the print data from the computer.
When using commercially available paper for
the first time
Perform Custom Paper Setting.
"Before Printing on Commercially
U
Available Paper" on page 197
Note:
When the selected paper type in the printer and the
printer driver differ, the following setting is applied.
❏ Genuine Epson paper is selected in the printer:
The printer driver setting is applied when printing.
❏ When custom paper is selected in the printer:
The printer setting is applied when printing.
Basic Operations

Replacing Paper

This section describes how to replace paper. The
process for removing the paper differs depending on
the type of paper currently loaded; follow the
instructions displayed in the control panel.
Buttons that are used in the following settings
A
Confirm that the printer is ready and press the
M button.
The Load/Remove Paper menu will be displayed.
B
Press the d/u buttons to select the type of
paper used to replace the current paper, and
then press the Z button.
C
The printer will eject the current paper.
The process for ejecting the paper varies with
the type of paper loaded, as described below.
If On is selected for Roll Paper Remaining
Barcode printing will begin; when printing is
complete, the roll will rewind automatically.
If Off is selected for Roll Paper Remaining
The roll rewinds automatically.
45