Baying kit
About this device
The Baying kit enables you to connect multiple HP Advanced Series Racks and Enterprise Series Racks of the
same series, height, and depth.
Kit contents
Item
24-inch baying brackets
600-mm baying brackets
T-30 Torx screws
Extra hardware might be included for your convenience.
Installing the baying kit
WARNING:
racks must be positioned and secured together according to these instructions. Failure to do so
could result in an unstable installation.
NOTE:
Remove the front and rear doors.
1.
Remove the side panels (if present between the racks).
2.
Quantity
6
6
15
To reduce the risk of personal injury or damage to the rack and equipment, the
The appearance of the rack might vary depending on the model of the rack purchased.
Baying kit 28