Table of Contents
Advertisement
Securing the 1075mm rack to the floor
The following illustration indicates where to drill the holes to secure the 1075 mm rack to the floor. The
distances are measured from the holes on the tie-downs. Have your building structural engineer drill the
holes. After the holes are drilled, insert a bolt with a washer into each hole to secure the rack to the floor.
Securing the 1200mm rack to the floor
The following illustration indicates where to drill the holes to secure the 1200 mm rack to the floor. The
distances are measured from the holes on the tie-downs. Have your building structural engineer drill the
holes. After your holes have been drilled, insert a bolt with a washer into each hole to secure the rack to the
floor.
Tie-Down kit 102
Advertisement
Table of Contents
