Table of Contents
Advertisement
Secure the sliding shelf to each sliding rail using one M4 x 12 flat HD screw and M4 external washer
4.
with one M4 nut on the inside of the shelf.
Attach the cable management arm to the sliding shelf with the flat side of the cable management arm
5.
mounting bracket flush with the sliding shelf.
Secure the cable management arm to the sliding shelf using two M4 x 12 flat HD screws and M4
6.
external washers with two M4 nuts on the inside of the shelf.
NOTE:
The cable management arm attaches to the rear of the sliding shelf on either the right or
left side.
100 Kilo Sliding Shelf kit 16
Advertisement
Table of Contents
