Table of Contents
Advertisement
Position the racks side by side, ensuring that the feet of the racks are on solid flooring (no cracks or
3.
openings).
Using two T-30 Torx screws in each bracket, attach three baying brackets (either 24-inch or 600-mm,
4.
depending on the floor layout) to the front and rear of each rack set.
Bay any additional racks.
5.
Attach side panels to each end of the bayed racks, and then re-attach the front and rear doors.
6.
Installation is complete.
Baying kit 29
Advertisement
Table of Contents
