Table of Contents
Advertisement
Insert and partially tighten four bolts with washers, securing the front tie-down to the front caster plate.
3.
Align the rear tie-down with the holes on the rear caster plate.
4.
Insert the four spring clips, and then partially tighten four bolts with washers, securing the rear tie-down
5.
to the rear caster plate.
Tighten the bolts from step 3.
6.
Tighten the bolts from step 5.
7.
Secure the rack to the floor
8.
The installation is complete.
("Securing the rack to the
floor" on page 100).
Tie-Down kit 99
Advertisement
Table of Contents
