Table of Contents
Advertisement
IMPORTANT:
From the system chassis rail to the left rear door:
Insert a T-25 Torx screw through the end of a 36.83-cm (14.5-inch) grounding strap, and then secure
1.
the screw to the system chassis rail.
Place the other end of the grounding strap over the grounding lug on the left rear door.
2.
Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the left rear
3.
door, and then tighten the washer.
IMPORTANT:
From the system chassis rail to the rack top:
Insert a T-25 Torx screw through one end of a 15.24-cm (6-inch) grounding strap, and then secure the
1.
screw to the system chassis rail.
The location of the welding stud on your model may vary.
The location of the welding stud on your model may vary.
Ground Bonding kit 52
Advertisement
Table of Contents
