Table of Contents
Advertisement
5. Advanced operation
4. Select one of the available failover inputs and confirm.
5.3.5
2
Picture Mode
nd
About 2
picture modes
nd
This function allows the display to show a second input source as an inset window inside the main source.
The available 2
nd
•
Off
•
Large PiP: 50% of display height in top-right corner
•
Small PiP: 30% of display height in top-right corner
To select the 2
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the 2
Picture Mode submenu.
nd
4. Select one of the available 2
5.3.6
2
Picture Source
nd
About 2
picture sources
nd
The available 2
nd
•
DVI
•
SDI
Independent Transfer Function:
Gamma and Color temperature for the 2nd Picture Souce are always set to Native and
6500K independently from the Transfer Function applied to the Main Picture Source. For
a perfect visualization of a DICOM image please select the DICOM input signal as Main
picture and, if needed, the Video image as 2nd picture.
To select the 2
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the 2
Picture Source submenu.
nd
4. Select one of the available 2
5.4
Configuration menu
5.4.1
Information
About information
The available information items for your display are:
30
picture modes for your display are:
picture mode
nd
picture modes and confirm.
nd
picture sources for your display are:
picture source
nd
picture sources and confirm.
nd
K5902130 (451920612471) MDSC-8231 04/11/2016
Advertisement
Table of Contents
