ProLights Diamond142L User Manual page 31

DIAMOND142L
11
3.4 Operation in Stand Alone Mode
In these modes the unit will be reproduce its show in automatic mode.
• Press the FUNC button so many times until the display shows [ArA ] (fig.5).
• To confirm, press the ENT button. The unit will operate in first automatic mode.
Fig.5
To choose a different automatic mode:
• Press the FUNC button, the display will blink.
• Use the UP and DOWN buttons to choose the desider mode, then press the ENT button to confirm.
All the available automatic modes are in the following table:
DISPLAY STAND ALONE MODE LASER EFFECT
Mixed laser effect Auto show with rAndom order
Auto mixed Slow laser effect with random order
Auto Fast dots laser effect
Auto Slow dots laser effect
Sound activated rAndom mixed laser effect
Sound activated Slow random mixed laser effect
Sound activated Fast moving dots laser effect
Sound activated Slow moving dots laser effect