ProLights Diamond142L User Manual page 22

2
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about the
SAFETY
General instructions
• The products referred to in this manual conform to the European Community Directives and are therefore
marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modifications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualified electrical in-
staller. Check that the main frequency and voltage correspond to those for which the unit is designed as given
on the electrical data label.
• This unit is not for home use, only professional applications.
• The projector is for indoor use only; never use the fixture under the following conditions:
- in places subject to excessive humidity;
- in places with a temperature of over 40°C or less than 10°C.
• Make certain that no inflammable liquids, water or metal objects enter the fixture.
• Do not dismantle or modify the fixture.
• All work must always be carried out by qualified technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation definitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way different to the one described in this manual, it may suffer dam-
ages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short
circuit, burns, electric shock, ect.
• Before starting any maintenance work or cleaning the projector, cut off power from the main supply.
• Every person involved with installation and maintenance of this device have to be qualified and follow
the instructions of this manual
• Always additionally secure the projector with the safety rope. When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the fixture's being used.
• The minimum distance between the fixture and surrounding walls must be more than 50cm and the air
vents at the housing must not be covered in any case.
• Keep any inflammable material at a safe distance from the fixture.
• Make sure that the power-switch is set to off-position before you connect the device to the mains.
• Do not switch the fixture on and off in short intervals as this would reduce the laser diode life.
• Never look directly at the light beam. Please note that fast changes in lighting, e. g. flashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
DIAMOND142L
installation, usage and maintenance of the unit.