Check Points Of Every 200 Hours - wsm BX1800 Workshop Manual

BX1800 · BX2200, WSM

[5] CHECK POINTS OF EVERY 200 HOURS

Replacing Engine Oil Filter Cartridge
1. See page G-12.
Checking Radiator Hose and Hose Clamp
Check to see if radiator hoses are properly fixed every 200 hours
of operation or six months, whichever comes first.
1. If hose clamps are loose or water leaks, tighten bands securely.
2. Replace hoses and tighten hose clamps securely, if radiator
hoses are swollen, hardened or cracked.
Replace hoses and hose clamps every 2 years or earlier if
checked and found that hoses are swollen, hardened or cracked.
Precaution at Overheating
Take the following actions in the event the coolant temperature
be nearly or more than the boiling point, what is called
"Overheating".
1. Stop the machine operation in a safe place and keep the engine
unloaded idling.
2. Don't stop the engine suddenly, but stop it after about 5 minutes
of unloaded idling.
3. Keep yourself well away from the machine for further 10 minutes
or while the steam blown out.
4. Checking that there gets no danger such as burn, get rid of the
causes of overheating
"Troubleshooting" section, and then, start again the engine.
(1) Radiator Hose
Checking Power Steering Line
1. Check to see that all lines are tight and not damaged.
2. If hoses are found to be worn or damaged, replace or repair them
at once.
(1) Power Steering Hose
G-20
G GENERAL
according to the manual,
(2) Clamp
W1018516
see
W1018562
W1018751
KiSC issued 07, 2006 A