Mower Lift Linkage - wsm BX1800 Workshop Manual

BX1800 · BX2200, WSM

[2] MOWER LIFT LINKAGE

Disassembling Mower Linkage
1. Remove the clevis pin and remove the mower rear link (1), (15)
and lift link (2), (14).
2. Remove the clevis pin and remove the lift link rear LH (13).
3. Remove the clevis pin and mower lift arm mounting screws, and
remove the lift link rear RH (3) with mower lift arm (4) as a unit.
4. Remove the both side of bushes (7), (11) and remove the rear lift
link shaft (9).
5. Remove the cutting height adjusting dial knob (8).
6. Remove the nut and remove the adjusting cam (12) and cutting
height adjusting rod (10).
(When reassembling)
Mower lift arm mounting
screw
Tightening torque
Mower rear link mounting
bolt and nut
5-S15
HYDRAULIC SYSTEM
(1) Mower Rear Link RH
(2) Lift Link RH
(3) Lift Link Rear RH
(4) Mower Lift Arm
(5) Link Adjusting Nut
(6) Lift Arm RH
(7) Bush
(8) Cutting Height Adjusting
Dial Knob
(9) Rear Lift Link Shaft
(10) Cutting Height Adjusting
Rod
(11) Bush
(12) Adjusting Cam
(13) Lift Link Rear LH
(14) Lift Link LH
(15) Mower Rear Link LH
W1016616
77.4 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 ft-lbs
124 to 147 N·m
12.6 to 15.0 kgf·m
91 to 108 ft-lbs
W1016794
KiSC issued 07, 2006 A