wsm BX1800 Workshop Manual page 232

BX1800 · BX2200, WSM
Meter Panel
1. Remove the hand accelerator lever grip (2).
2. Disconnect the connector for main switch (4), timer relay (2)
(BX1800 only) and flasher unit (1).
3. Remove the panel mounting screws and dismount the meter
panel (5).
4. Disconnect the all connectors from panel and remove the meter
panel (5).
(1) Connector for Flasher Unit
(2) Connector for Timer Relay (BX1800
Only)
Steering Controller
1. Disconnect the power steering hoses (1), (2), (3), (4).
2. Remove the steering controller mounting screws and remove the
steering controller (5).
(When reassembling)
• Be sure to connect the power steering hoses to their original
position, and tighten them to the specified torque.
Power steering hose
Tightening torque
mounting nut
(1) Cylinder Hose RH
(2) Cylinder Hose LH
(3) Return Hose
(4) Delivery Hose
(5) Steering Controller
4-S5
STEERING
(3) Accelerator Lever Grip
(4) Connector for Main Switch
(5) Meter Panel
W1011901
28.4 to 30.0 N·m
2.9 to 3.1 kgf·m
20.9 to 22.1 ft-lbs
A : Bottom View
P : Pump Port
(Connect to Delivery Hose)
T : Tank Port
(Connect to Return Hose)
L : L Port
(Connect to Cylinder LH Hose)
R : R Port
(Connect to Cylinder RH Hose)
a : Right
b : Front
W1012133
KiSC issued 07, 2006 A