wsm BX1800 Workshop Manual page 254

BX1800 · BX2200, WSM
PTO Cover, Fender Bracket, Hitch Plate and Others
1. Remove the PTO covers (1), (2) and (6).
2. Remove the hitch plate (4) and rear supports (3), (5).
3. Remove the fender brackets (7), (9), shim (10) and fender center
stay (8).
(When reassembling)
• Do not firmly tighten all screws, bolts and nuts until most
components are attached.
• After the all screws, bolts and nuts are tighten to the specified
torque, install and secure the shim (10) with hexagonal socket
head screw between fender brackets (7), (9) and fender center
stay (8).
• When tightening the upper PTO cover (1) mounting bolts and
nuts, adjust the operating force to 29.4 to 49.0 N (3.0 to 5.0 kgf,
6.6 to 11.0 lbs).
PTO cover RH and LH
mounting bolt and nut
Rear support mounting
screw (M12)
Hitch plate mounting bolt
Tightening torque
and nut (M14)
Fender bracket mounting
bolt and nut (M14)
Fender center stay
mounting screw (M14)
(Reference)
• Thickness of shim (10) : 1.2 mm (0.047 in.)
(1) Upper PTO Cover
(2) PTO Cover RH
(3) Rear Support RH
(4) Hitch Plate
(5) Rear Support LH
5-S8
HYDRAULIC SYSTEM
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 ft-lbs
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 ft-lbs
124 to 147 N·m
12.6 to 15.0 kgf·m
91 to 108 ft-lbs
124 to 147 N·m
12.6 to 15.0 kgf·m
91 to 108 ft-lbs
124 to 147 N·m
12.6 to 15.0 kgf·m
91 to 108 ft-lbs
1.5 mm (0.059 in.)
1.9 mm (0.075 in.)
(6) PTO Cover LH
(7) Fender Bracket RH
(8) Fender Center Stay
(9) Fender Bracket LH
(10) Shim
W1026852
KiSC issued 07, 2006 A