Stryker altrix Quick Start Manual page 4

Manual therapy
In Manual mode, the product controls the water temperature only. A
temperature probe is not required when operating in manual mode.
Select Manual therapy mode
and confirm
Display the patient data graph
To display the patient data graph, tap the graph icon.
The patient data graph stores the following variables:
• Primary patient temperature reading (A)
• Intermediate target temperature (B)
• Water temperature (C)
• Power level (D)
8001-069-002 Rev B.2
Select desired water
temperature
A
B
C
D
Refer to the Altrix Precision Temperature Management System Operations Manual for additional information.
Pause therapy
• To pause therapy, press and hold the Pause Therapy
button for two seconds.
• To resume therapy, press and hold the Pause Therapy
button for two seconds.
Stop therapy
• Press and hold the Stand-by button for two seconds.
• Unplug the product from the wall outlet.
• Open the clamps for approximately 10 minutes to allow
the water to drain back into the controller.
• Close clamps to stop the water flow and detach
wraps from hoses.
card 4A