Troubleshooting By Remote Control; The Inspection / Test Button - Daikin ALTHERMA HT ERSQ 011 AA Service Manual

ESIE09-08A

2. Troubleshooting by Remote Control

2.1

The INSPECTION / TEST Button

The following modes can be selected by using the [Inspection/Test Operation] button on the remote
control.
Field settings
Depress Inspection/Test Operation button for
more than 4 seconds.
Press Inspection/Test Operation
button once.
Following codes can be checked.
• Malfunction codes (latest)
Press test
• Indoor model code
Press test
• Outdoor model code
See "Operation of the Remote Controller's Inspection / Test Operation Button".
Troubleshooting
Depress Inspection/Test Operation button for
more than 4 seconds.
Local
setting
mode
Normal
mode
After 10 seconds
Inspection
mode
Press Inspection/Test Operation
button once.

Troubleshooting by Remote Control

Service data can be obtained.
Service
• Malfunction code history
mode
Service settings can be made.
Press Inspection/Test Operation button once.
Press Inspection/Test Operation button once. Or
after 30 minutes
Test
operation
Thermostat is forcibly turned on.
mode
Space heating -> see test run.
(V0815)
131