Field Setting; Field Setting From Remote Control - Daikin ALTHERMA HT ERSQ 011 AA Service Manual

ESIE09-08A

3. Field Setting

3.1

Field Setting from remote control

Individual function of indoor unit can be changed from the remote control. At the time of installation or
after service inspection / repair, make the local setting in accordance with the following description.
Wrong setting may cause malfunction.
(When optional accessory is mounted on the indoor unit, setting for the indoor unit may be required to
change. Refer to information in the option handbook.)
3.1.1 Wired remote control
EKRUAHTA(BRC21A51)
EKRUAHTB(BRC21A52))
To change one or more field settings, proceed as follows.
1. Press the z button for a minimum of 5 seconds to enter FIELD SET MODE.
2. Press the bi button to select the appropriate field setting first code (8-).
3. Press the bj button to select the appropriate field setting second code (-88).
4. Press the pfi button and pfj button to change the set value of the select field setting.
5. Save the new value by pressing the pr button.
6. Repeat step 2 through 4 to change other field settings as required.
7. When finished, press the z button to exit FIELD SET MODE.
Test Operation
c
b
1
The $ icon (c) will be displayed. The current selected field setting code is indicated ; (b),
with the set value displayed to the right - (a).

Field Setting

a
87