Tone Configuration Options; Introduction - Baldwin Boxall OmniCare Installation Manual

C O M M U N I C A T I O N S
5 Tone Configuration
5.1 I
OmniCare issue 1
Options
NTRODUCTION
The OmniCare Remote Units have a range of features and options
that can be enabled or disabled by playing them a unique sequence
of tones.
This has the advantage that Remote Units can be configured or re-
addressed without the need for any tools or removing the Remote
Units from their enclosures.
Most of the features that are set using the Tone Generation
Software can also be set using jumpers on the Remote Units.
N : If jumpers are set on the Remote Units then these will override the
OTE
Tone Configuration settings.
Re-addressing Remote Units is a function that can only be
achieved using Tone Generation Software..
OmniCare EVC System
Installation & Commissioning Manual
65