Telstra FaxStream
In Australia, Telstra offers the FaxStream
assign two numbers to your line: one for fax and one for telephone. When the fax
number is called, the network sends a specific ring tone which your unit recognises and
automatically handles as a fax call. If the telephone number is called, a different ring
tone is sent out from the network so that the call is handled as a voice call. This means
that there is no switching delay at the caller's end.
• Triple ring (short-short-short) for fax receiving.
Three short rings, at regular intervals.
• Any ring except triple ring (depending on your switchboard) for telephone
conversation.
n
You can also set the unit for Telstra's FaxStream
(1 Software User's Guide)
Contact Telstra for connection information.
Setting the Unit for Network Switch
Follow this procedure to set the receive mode to NET SWITCH:
1
Press Function.
2
Press Data Registration.
3
Press Set.
4
Use d or u to select RX SETTINGS.
5
Press Set.
6
Use d or u to select RX MODE.
7
Press Set.
8
Use d or u to select NET SWITCH.
Chapter 8
™
Duet (Australia Only)
™
Duet capability. This service allows you to
™
Duet service from the MultiPASS Suite.
Ex:
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
FAX ONLY MODE
NET SWITCH
Receiving Faxes
8-15