Honeywell MX7 TECTON User Manual page 198

EndIf
Description
Syntax
Parameter
Example
Notes
EndIfFile
Description
Syntax
Parameter
Example
Notes
EndIfTerm
Description
Syntax
Parameter
Example
Notes
FCopy
Description
Syntax
Parameters
Example
Notes
9 - 8
Ends conditional command block begun with the previous IF command.
EndIf
None
See IfFile (page 9-9).
Results are unpredictable if not paired properly with If... command.
Ends conditional command block begun with the previous IF command.
EndIfFile
None
See IfFile (page 9-9).
Results are unpredictable if not paired properly with IfFile command.
Ends conditional command block executed only if the device type specified in IfTerm match-
es.
EndIfTerm
None
See IfTerm (page 9-9).
Results are unpredictable if not paired properly with IfTerm command.
Copies a file, overwriting any existing file.
fcopy,source-file,destination-file
source-file: The file to be copied, including its path
destination-file: The destination path and filename
fcopy,\Storage Card\MyData.dat,\Temp\MyData.dat
If the destination file already exists it is overwritten.
If the source file is blank, a zero-byte file is created.