Startup Help - Honeywell MX7 TECTON User Manual

Startup Help

Issue:
Can't change the date/time or adjust the volume.
Solution:
AppLock is installed and may be running in User Mode on the MX7 Tecton. AppLock user mode restricts access to the con-
trol panels.
Issue:
Touch screen is not accepting stylus taps or needs recalibration.
Solution:
If the touch screen is not accepting stylus taps, press Ctrl+Esc (Blue+Alt) to force the Start Menu to appear. Use the arrow
keys to move from program to program. Press Enter to open folders or start a program e.g., Registry panel Warmboot but-
ton.
Issue:
The MX7 Tecton seems to lockup as soon as it is rebooted.
Solution:
There may be slight delays while the wireless clients connect to the network, authorization for voice-enabled applications
complete, Wavelink Avalanche management of the MX7 Tecton startup completes, and Bluetooth relationships establish or
re-establish. When the desktop appears or an application begins, the MX7 Tecton is ready for use.
Issue:
New MX7 Tecton main batteries don't last more than a few hours.
Solution:
New batteries must be fully charged prior to first use. Li-Ion batteries (like all batteries) gradually lose their capacity over
time (in a linear fashion) and never just stop working. This is important to remember – the MX7 Tecton is always 'on' even
when in the Suspend state and draws a small amount of battery power at all times.
Cold Storage Battery Life – minimum 2.5 hours while the unit is roaming, powered on with ambient temperature -10°C
(14°F) or above, display backlight turned on, keypad LED backlight on, radio connected to Access Point, and scanner
decoding bar codes. The Li-Ion main battery (MX7A381BATT, MX7393BATT, and MX7396BATTERY) has been designed
specifically for the Cold Storage device. This 1250mAh battery has a blue label while the standard 2200mAh battery has a
white (MX7A380BATT and MX7392BATT) label.
Issue:
Keep losing ActiveSync connection between my host computer and the MX7 Tecton.
Solution:
Disconnect the USB cable, wait 1-2 seconds and reconnect the cable. The MX7 Tecton will not enter Suspend as long as
an ActiveSync session is running. The ActiveSync session prevents it from going into suspend.
2 - 25