Mx7T Options - Honeywell MX7 TECTON User Manual

MX7T Options

Start > Settings > Control Panel > MX7T Options
Set options such as IP V6, TimeSync, Touch screen enable and CapsLock. Also set Status Popup taskbar icon display
options for the Admin and User. It may be necessary to warmboot the MX7 Tecton after making desired changes. A pop up
window indicates if a warmboot is required.
Communication
Options on this tab configure communication options for the MX7 Tecton.
Enable TCP/IP Version 6
By default, IPv6 is disabled on the MX7 Tecton. Tap to put a checkmark in this check box to enable IPv6.
Allow Remote Desktop Autologon
By default, Remote Desktop Autologon is disabled. Tap to put a checkmark in this check box to enable Remote
Desktop Autologon.
The .RDP file must be saved in the \System folder. When prompted, use the Save As button to save the .RDP file
is the \System directry. If the .RDP file is saved in the default root folder location, the .RDP file will not persist
across a warmboot.
Autolaunch TimeSync
By default, TimeSync does not automatically run on the MX7 Tecton. To enable TimeSync to run automatically on
the MX7 Tecton, tap to put a checkmark in this check box.
Synchronizing with a Local Time Server
By default, GrabTime synchronizes via an Internet connection. To synchronize with a local time server:
1. Use ActiveSync to copy GrabTime.ini from the My Device > Windows folder on the MX7 Tecton to the host
PC.
2. Edit the copy of GrabTime.ini on the host PC. Add the local time server's domain name to the beginning
of the list of servers. You can optionally delete the remainder of the list.
3. Copy the modified GrabTime.ini file to the My Device > System folder on the MX7 Tecton.
The System/GrabTime.ini file takes precedence over the Windows/GrabTime.ini file. System/Grabtime.ini
also persists after a coldboot; Windows/Grabtime.ini does not persist.
5 - 40