Honeywell MX7 TECTON User Manual page 167

EAN8 - Advanced Properties
Transmit Check Character – When enabled, transmit the check character. Default is enabled.
Addenda
Read 2-Digit – When enabled, transmit the 2 digit addenda. Default is disabled.
Read 5-Digit – When enable, transmit the 5 digit addenda. Default is disabled.
Required – When enabled, only transmit bar codes with a 2 or 5 digit addenda. Default is disabled.
Insert Separator – When enabled, insert a space between the code and addenda. Default is enabled.
8 - 17