Stylus; Double Tap - Honeywell MX7 TECTON User Manual

Stylus

Start > Settings > Control Panel > Stylus
Use this control panel option to set stylus double-tap sensitivity properties and calibrate the MX7 Tecton touch panel when
needed.

Double Tap

Follow the instructions on the screen and tap the OK button to save any double tap changes.
Calibration
Calibration involves tapping the center of a target. If you miss the center, keep the stylus on the screen, slide it over the
target's center, and then lift the stylus.
To begin, tap the Recalibrate button on the screen with the stylus. Press and hold the stylus on the center of the target
as it moves around the screen. Press the Enter key to keep the new calibration setting or press the Esc key to revert to
the previous calibration settings.
5 - 57