Registry - Honeywell MX7 TECTON User Manual

Registry

Start > Settings > Control Panel > Registry
Choose a software reload scheme.
Load User Defaults
When clicked, a standard load file dialog is opened, to allow the user to pick a Registry Save (.RSG) file. The applet
then copies the specified User registry file to the Active registry. The user is asked to verify a reboot, and then the
applet does a warmboot to activate the new registry.
Load User Defaults function takes 20 seconds from SD card, or 10 seconds from internal flash.
Save User Defaults
When clicked, a standard Save File dialog is opened, to allow the user to name the Registry Save (.RSG) file. The
applet then copies the Active registry to the specified User registry file. Save the registry file to a persistent location
(\System directory or storage card) to
Save User Defaults takes 30 seconds to save to SD card, or 10 seconds to save to internal flash.
Load Factory Defaults
The applet copies the Factory Default registry from the OS to the Active registry (by deleting the current registry). The
user is asked to verify a reboot, and then the applet does a restart to activate the factory default registry. If a user pass-
word has been set, the applet warns the user that the password will be erased, and asks the user to enter the pass-
word before the reboot is allowed.
Warmboot
When clicked, the OS does a registry flush (Active registry saved to Flash registry hive), and then a warmboot.
Restart
When clicked, the OS does a registry flush, and then a restart.
5 - 55