Table of Contents
Advertisement
For the highlighted Riding Mode some of the
parameter settings are displayed:
-
engine power (ENGINE): ENGINE lettering
followed by set engine power (HIGH, MEDIUM
or LOW);
-
ABS: the ABS text followed by the level of
calibration set (1, 2, 3) in case the ABS is active
or by OFF in case the ABS is disabled.
-
DTC: the DTC text followed by the level of
intervention set (1, 2, 3, 4, 5, 6, 7, 8) in case the
DTC is active or by OFF in case the DTC is
disabled;
-
DWC: the DWC text followed by the level of
intervention set (1, 2, 3, 4, 5, 6, 7, 8) in case the
DWC is active or by OFF in case the DWC is
disabled;
-
DSS front suspension: FRONT lettering followed
by set compression and rebound for the fork;
-
DSS rear suspension: REAR lettering followed by
set compression and rebound for the rear shock
absorber;
-
rear shock absorber spring preload: PRELOAD
lettering followed by set spring preload (from 01
to 24) for the rear shock absorber.
82
The displayed information are the settings stored in
every single Riding Mode. The stored settings may
be the factory ones (Ducati default settings) or the
ones customized by the owner. Any time the
CONFIRM MENU button (4) is pressed, you highlight
a riding mode and the associated parameters are
displayed (A, Fig 32).
Advertisement
Table of Contents
