Table of Contents
Advertisement
Press button (1):
-
if count is increasing, it stops (PAUSE) and value
is flashing; press again button (1) to resume
metering;
-
if count is decreasing, it changes and starts
increasing the value.
Press button (2):
-
if count is increasing, it changes and starts
decreasing the value;
-
if count is decreasing, it stops (PAUSE) and value
is flashing; press again button (2) to resume
metering;
When count is 0.0 (miles or Km), the Trip Master can
only be increased and it is not possible to reverse the
count as long as value is below or equal to 0.1 miles
(100 meters).
If value reaches 999.9 (miles or Km), while increasing,
it will get automatically back to zero (0.0) and carry on
increasing.
If value reaches 0.0 (miles or Km), while decreasing,
the counting will stop (PAUSE), value will flash and
calculation will be reversed to become increasing.
Value is automatically reset and counter restarts its
increasing operation in the following instances:
-
upon any power off (Battery-Off);
-
if units of measurement are changed through the
instrument panel UNIT SETTING function.
145
Advertisement
Table of Contents
