Table of Contents
Advertisement
If engine is not started within 60 seconds since
"manual ignition", the low and/or high beam lights are
turned OFF.
If the low beam and/or high beam was turned on
before starting the engine (with the procedure
described above), the headlight turns off
automatically when starting the engine and will turn
on again when the engine has been completely
started.
Function for switching the Cornering lights on/
off
This Function allows the automatic switch-on/off of
the Cornering lights. The cornering lights are used to
enhance lighting in a bend, i.e., in the part of the road
ahead, on the side of the bend. The cornering lights
are activated on the right when the lean angle is to
the right, while they activate on the left when the lean
angle is to the left.
270
Advertisement
Table of Contents
