Table of Contents
Advertisement
When entering the function, the currently set ABS
level or status is indicated on the right (e.g.: OFF).
Customization options are indicated on the central
drop-down menu: levels 1 to 3 and status OFF.
Press buttons (1) and (2) to highlight the levels one
by one: in particular, use button (1) to highlight the
following item and button (2) to highlight the previous
item.
Once desired level is selected, press CONFIRM
MENU button (4) to highlight MEMORY item.
Once the desired new setting is highlighted, press
button (4) to highlight MEMORY in orange.
To save the new setting, hold button (4) for two
seconds while the message MEMORY is highlighted
in orange.
If storage is successful, MEMORIZED will be
highlighted in green for two seconds, set level or
status will be refreshed and then EXIT will be
highlighted in green.
To exit the menu and go back to previous page, select
EXIT and press button (4).
198
Note
When you enable or disable the ABS through
this function, i.e. toggling from disabled to enabled
system or vice-versa, the procedure for activating or
deactivating the ABS is carried out: the change of
status of the ABS control unit is not instantaneous, it
takes at least 6 seconds.
Advertisement
Table of Contents
