Grandstream Networks GXP1760 Administration Manual page 48

Connection Request
The port for the ACS to connect to the phone.
Port
CPE SSL Certificate
The Cert File for the phone to connect to the ACS via SSL.
CPE SSL Private
The Cert Key for the phone to connect to the ACS via SSL.
Key
Maintenance  Security Settings Security
Configures the access control for the users to configure from keypad Menu.
There are three different options. The default setting is "Unrestricted":


Configuration via
Keypad Menu

If set to "Yes", the keypad can be locked by pressing and holding the STAR *
key for about 4 seconds. A lock icon will show indicating the keypad is locked.
Enable STAR key
The default setting is "Yes".
Keypad Locking
Note: When the keypad is locked, users would need press and hold the STAR
* key for about 4 seconds again and then enter the password to unlock it.
Configures the password to lock/unlock the keypad.
Password to Lock/
Unlock
SIP TLS Certificate
SSL Certificate used for SIP Transport in TLS/TCP.
SIP TLS Private Key
SSL Private key used for SIP Transport in TLS/TCP.
SIP TLS Private Key
SSL Private key password used for SIP Transport in TLS/TCP.
Password
Web Access Mode Sets the protocol for web interface. The default setting is "HTTP".
Disables SSH access. The default setting is "No".
Disable SSH
Web/Keypad/Restrict Specifies the time in minutes that the web or LCD login interface will be locked
mode Lockout out to user after five login failures. This lockout time is used for web login, STAR
keypad unlock and LCD restrict mode admin login. Range is 0-60 minutes.
Duration
Maintenance  Security Settings Trusted CA Certificates
Trusted CA
Upload CA Certificate file to phone.
Certificates
Maintenance  Packet Capture
Choose location where the capture will be stored. Default is "Internal Storage".
Capture Location
With RTP Packets Defines whether packet capture file contains RTP or not. Default setting is "No".
Unrestricted. All the options can be accessed in keypad Menu.
Basic settings only. The SIP option under Phone submenu, and
Network, Upgrade, UCM Detect and Factory Reset options under System
submenu will not be available in LCD Menu.
Constraint Mode. The phone will require administration password to
change the Network, Upgrade and Factory Reset options under System
submenu, and SIP option under Phone submenu as well.
GXP17xx Administration Guide
P a g e | 47