Maintenance Page Definitions; Table 9: Maintenance - Grandstream Networks GXP1760 Administration Manual

OpenVPN Transport Specify the Transport Type of OpenVPN whether UDP or TCP. Default is UDP.
OpenVPN CA Copy/Past the Certification Authority of OpenVPN.
OpenVPN Certificate Copy/Past OpenVPN certificate.
OpenVPN Client Key Copy/Past OpenVPN Key.

Maintenance Page Definitions

Maintenance  Web Access
New Password
Confirm Password
Current Password
New Password
Confirm Password
Maintenance  Upgrade and Provisioning
Firmware Upgrade
and Provisioning
Always Authenticate
Before Challenge
Allow DHCP Option
43 and Option 66
Override Server
Additional Override
DHCP Option
Allow DHCP Option
120 to override SIP
Server
3CX Auto Provision
Automatic Upgrade
Hour of the Day (0-
23)
Table 9: Maintenance Page Definitions
Set new password for web GUI access as User. This field is case sensitive.
Enter the new User password again to confirm.
The current admin password is required for setting a new admin password.
Set new password for web GUI access as Admin. This field is case sensitive.
Enter the new Admin password again to confirm.
Specifies how firmware upgrading and provisioning request to be sent: Always
Check for New Firmware, Check New Firmware only when F/W pre/suffix
changes, Always Skip the Firmware Check. The default setting is "Always
Check for New Firmware".
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials
before being challenged by the server. The default setting is "No".
Default setting is "Yes". DHCP option 66 originally was only designed for TFTP
server. Later on it was extended to support an HTTP URL. GXP phones support
both TFTP and HTTP server via option 66. Users can also use DHCP option
43 vendor specific option to do this. DHCP option 43 approach has priorities.
When enabled, users could select Option 150 or Option 160 to override the
firmware server instead of using the configured firmware server path or the
server from option 43 and option 66 in the local network. Please note this option
will be effective only when option "Allow DHCP Option 43 and Option 66 to
Override Server" is enabled. The default setting is "None".
Enables DHCP Option 120 from local server to override the SIP Server on the
phone. The default setting is "No".
Enables automatic provision feature on the phone when 3CX is used as the
SIP server. The default setting is "Yes".
Enables automatic upgrade and provisioning. The default setting is "No".
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
GXP17xx Administration Guide
P a g e | 44